~Glass mould lubricant is universal lubricant applied to blank mould, neck mould and die mould. Under high temperature, please dip this lubricant with special pure cotton yarn brush by hand and apply it on the inner chamber of the mould. Then a thin film with good lubricity can be formed rapidly, "dry feed dropping" is finished, so as to improve the quality of glass bottles and cans, enhance the production efficiency of bottle-making machine, easy to clear up the mould by using this lubricant.
Summary:
Extended swabbing cycles and maintaining a clean product, have been accomplished by the formulation of BML339. Transfer and buildup of carbon is minimized, therefore high quality appearance is maintained over an extended period and down time to change dirty blanks is reduced. Formulated for a broad range of ware for general purpose.
Features and Performance
1. Long swab cycles and easy loading of gob.
2. Applied to parison mould and die with high universality.
3. Formed into a thin and even film on the inner wall of die cavity, thus cleaner glass bottles and cans and higher rate of finished products can be obtained comparing with using other lubricant.
4. Easy to clear up the mould by using this lubricant.
5. Applied to bottle-making machine and the production of various bottles and cans at home and aboard.
6. Recommended for bottles when cleanliness is of the utmost importance.
Application Instructions
1. Shall be used originally. Please do not blend with other oils, otherwise lubrication effect may be affected.
2. Use pure cotton yarn brush to apply by hand. The size of brush shall match the inner chamber of mould.
3. After dipping lubricant, the brush shall be wringed out to apply lubricant thinly and evenly for best results.
4. Please pay attention to keep certain lubrication cycle. The less the lubricant is applied each time, the cleaner glass bottles and cans are and the higher the rate of finished products is.
Storage & Packaging
1. Shall be stored in airtight and moisture-proof environment, and not be roasted over the fire. Storage period is 12 months.
2 . Packed in plastic bottle and carton: 1kg for each bottle, and 20kg for each carton. Packed in plastic drum: 18kg for each drum. Packed in iron drum: 180kg for each drum.
